INVESTIGATION 001 — PFAS SUPPLEMENTACTIVEOhio EPA / UCMR5
Data Investigation

PFAS in Northeast Ohio Water

A county-by-county breakdown of what Ohio EPA's UCMR5 monitoring found — and didn't find — across public water systems in eight counties.

Share
Counties Covered8
PFAS Compounds Tested29
Systems Tested25+
MCL Exceedances0
Private Wells Tested0

Data: Ohio EPA UCMR5 · Updated August 2026

Background

What Is UCMR5?

The Fifth Unregulated Contaminant Monitoring Rule (UCMR5) required public water systems serving more than 3,300 people to test for 29 PFAS compounds between 2023 and 2025. Ohio EPA collected and published those results. This page compiles the Northeast Ohio data from that database — raw detections, non-detections, and the systems that were tested.

PFAS are a family of thousands of synthetic chemicals used in industrial and consumer products since the 1940s. Some are associated with health effects at very low concentrations. EPA set Maximum Contaminant Levels (MCLs) for six PFAS compounds in April 2024.

How We Read This Data
01

Data drawn from EPA's published UCMR5 occurrence dataset and Ohio EPA's public water system records.

02

We report detections above the Minimum Reporting Level (MRL) for each compound. Non-detects are listed as ND.

03

Results compare finished drinking water — water after treatment, before distribution — not raw source water.

04

We distinguish between systems that were tested and systems that were not required to test (those serving fewer than 3,300 people).

05

Where a compound was detected, we note the highest reported value and whether it exceeds EPA's April 2024 MCL.

County-by-County

Eight Counties. What the Data Shows.

Each entry below reflects what Ohio EPA's UCMR5 monitoring found in that county's public water systems. Systems serving fewer than 3,300 people were not required to test. Private wells are not covered.

Cuyahoga County

NO EXCEEDANCES
Primary system: Cleveland WaterSource: Surface water (Lake Erie)Population served: ~1.2 million

Cleveland Water — the dominant system serving Cuyahoga County — tested 29 PFAS compounds across four treatment plants over three monitoring rounds. 28 compounds were not detected at any plant in any round. One compound was detected at a very low level during one round, well below EPA's MCL. This is the most thoroughly documented PFAS result in the region.

Detections
PFBSDetected — trace level, one roundNo MCL set

Lake County

NO DETECTIONS REPORTED
Primary system: Lake County Utilities / North Perry VillageSource: Surface water (Lake Erie) and groundwaterPopulation served: ~230,000

Lake County's larger public water systems were tested under UCMR5. No PFAS compounds were detected above reporting levels in finished drinking water across the systems tested. Smaller systems serving fewer than 3,300 people were not required to test.

No PFAS detected above reporting levels

Geauga County

LIMITED DATA — PRIVATE WELLS NOT TESTED
Primary system: Primarily private wells and small systemsSource: Groundwater (private wells dominant)Population served: ~95,000

Geauga County is predominantly served by private wells and small community systems, most of which fell below the 3,300-person threshold for UCMR5 testing. The one larger system tested showed no PFAS detections. Private well contamination in this county is an open question — UCMR5 does not cover private wells.

No PFAS detected above reporting levels

Lorain County

NO DETECTIONS REPORTED
Primary system: City of Lorain / Elyria WaterSource: Surface water (Lake Erie) and groundwaterPopulation served: ~310,000

Lorain and Elyria's municipal systems were tested under UCMR5. No PFAS compounds were detected above reporting levels in finished drinking water. The county has a mix of Lake Erie surface water intakes and groundwater-sourced systems — both were represented in the testing.

No PFAS detected above reporting levels

Medina County

NO DETECTIONS REPORTED
Primary system: City of Medina / BrunswickSource: Groundwater and purchased surface waterPopulation served: ~180,000

Medina County's tested systems showed no PFAS detections above reporting levels. The county draws from a mix of groundwater and purchased treated water from larger regional systems. Smaller rural systems and private wells were not covered by UCMR5.

No PFAS detected above reporting levels

Summit County

NO DETECTIONS REPORTED
Primary system: Akron Water / AMWASource: Surface water (Cuyahoga River / Portage Lakes)Population served: ~540,000

Akron's water system draws from the Cuyahoga River and Portage Lakes — a different source than Lake Erie. UCMR5 testing across Summit County's larger systems found no PFAS detections above reporting levels. The Cuyahoga River's industrial history makes this a system worth continued monitoring.

No PFAS detected above reporting levels

Portage County

NO DETECTIONS REPORTED
Primary system: Ravenna / Kent / AuroraSource: Groundwater and surface water mixPopulation served: ~165,000

Portage County's tested systems showed no PFAS detections. The county has a mix of municipal systems drawing from groundwater and surface water. A significant portion of the rural population relies on private wells not covered by UCMR5 monitoring.

No PFAS detected above reporting levels

Ashtabula County

NO DETECTIONS REPORTED
Primary system: City of Ashtabula / ConneautSource: Surface water (Lake Erie) and groundwaterPopulation served: ~97,000

Ashtabula County's Lake Erie-sourced systems were tested under UCMR5 with no PFAS detections reported. The county has a significant industrial history along its shoreline and river corridor. Smaller systems and private wells were not required to test.

No PFAS detected above reporting levels
Gaps in the Record

What This Data Doesn't Tell Us

A 'no detection' result in UCMR5 is meaningful — but it has limits. Here's what the data doesn't cover.

Private wells are invisible here.

UCMR5 only covers public water systems serving 3,300+ people. An estimated 15–20% of Northeast Ohio residents rely on private wells. Those wells were not tested. A 2009 peer-reviewed study of 180 randomly selected private wells in two Northeast Ohio counties found total coliform bacteria in 45% of the wells sampled — findings that describe that study population, not all private wells across the region. PFAS in private wells is an open and unmonitored question.

Small systems weren't required to test.

Systems serving fewer than 3,300 people — many rural community water systems, mobile home parks, and small municipalities — were exempt from UCMR5. Their PFAS status is unknown.

Raw source water vs. finished water.

UCMR5 tests finished drinking water after treatment. PFAS may be present in source water (rivers, lakes, groundwater) at levels that treatment reduces but does not eliminate. We don't have comprehensive source water PFAS data for this region.

UCMR5 tested 29 compounds. Thousands exist.

The PFAS family includes thousands of compounds. UCMR5 tested 29 of them — the ones EPA prioritized. Compounds not on the list were not tested. A 'no detection' result means no detection of those 29 compounds, not a clean bill of health for all PFAS.

Industrial discharge and legacy contamination.

Northeast Ohio has a significant industrial history. PFAS from manufacturing, firefighting foam (AFFF), and industrial discharge can migrate into groundwater over decades. The UCMR5 data reflects current finished water — not the full picture of regional contamination pathways.

Tip Line

Know Something We Don't?

If you have access to water quality data, work in environmental regulation, or have had your well or tap water tested for PFAS — we want to hear from you.

Submit a Tip
Public Records

We're Requesting the Raw Data.

We've submitted public records requests to Ohio EPA for the underlying UCMR5 monitoring data for Northeast Ohio systems. When we receive it, it goes in the receipts.

View Public Records Log